Just a thought, but maybe it is a bad relais in the ATU? I had once problems with higher SWR at 10m although the antenna was ok. Cycling the ATU on/off cured this problem.
73 de Roland, DC1RS rfenabled wrote: > > Hi > > Again today I had soft audio when I turned the K3 on. > > I pressed the ATU button and the volume became loud and has remained at > that level. > > Here are the settings. > > 7.102.00 LSB > Width. 2.50 > FC 0.50 > Hi. 1.75 > LO. 0.00 > Filter 2.1 8 pole > (Others installed are also 8 pole 13,6,2.8 and 400) > Antenna is 80M full wave loop and has a 1.2:1 dip on this frequency) > AF knob was at quarter PAST the hour as the audio is generally very low > and has been for a long time. > > After the change in volume it sounds great at the 11 o'clock position. > > FW ver 3.41 > > Hope this helps someone figure out what may be causing this up/down audio > change. > > K3/100 #679 > > 73's > Gary > VK4WT/P > Sent via BlackBerry® from Telstra > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ----- K3/100 #1243, KFL3A-2.8K, KFL3A-2.1K, KFL3A-400, KRX3, KFL3A-2.8K, KFL3A-400, KAT3, KXV3A -- View this message in context: http://n2.nabble.com/K3-Audio-Volume-tp3870485p3870564.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
