Note: you may want to use another memory (e.g., 99) if you are using memories 0-9 for Band Sel.
This macro may not work if you are using software that polls the K3 rapidly (e.g., Ham Radio Deluxe). 73, ... Joe, W4TV > > On Oct 24, 2009, at 12:05 PM, drewko <[email protected]> wrote: > > Here is a macro that will immediately scan the range from > VFOA through VFOB, without having to first do the M->V/ V->M, > etc. sequence as is normally required for a new SCAN. The macro > automatically stores the scan range in M4. VFOA should be lower > in freq than VFOB. The macro can scan in unsquelched mode (AF > ON) by holding the assigned macro key for a long push (just > as with the SCAN key). > > Macro sequence: > V->M > M4 > M->V > M4 > SCAN > > Macro Text: SWT15;;;;;SWT39;;;;;SWT23;;;;;SWT39;;;;;SWH41;;;;; > (Note, the extra semicolons are required for delay timing.) > > > 73, > Drew > AF2Z ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
