On Saturday Oct 24 2009 at 2126 EDT Richard Gilley (AD1G) wrote ... Planning on adding SSB to my K2 ... Your thoughts will be appreciated. 73
-- Regardless of which microphone you settle on, do yourself a favor and check out the K2 Internal Mic Adaptor (IMA) featured at http://www.unpcbs.com/ The IMA supports all of the microphone pin-outs and bias resistance values described in the KSB2 manual, and then some. However beyond that, the biggest advantage of the IMA is that the pin-out and/or bias resistance can be changed simply by removing the K2's left-side panel. And the only tool that's required to reconfigure the IMA is a pair of needle nose pliers (to reposition jumpers). At last count the list of supported microphones was 55, but that number doesn't include most Heil mics and headsets, which are typically purchased with a cable for either the Icom, Kenwood, or Yaesu pin-out. 73, Gary KI4GGX webmaster www.unpcbs.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html