AM sync is likely by the end of next week (at least for field test). TCXO compensation is partway there: you can now enter your 1-PPM TCXO data into K3 Utility, which sends the data to the K3.
The firmware end of this will be more time consuming, based on my initial experiments. Since the 1-PPM TCXO is already meeting our original spec for firmware-based compensation (0.5 PPM from 0-50 C), I've been holding off on this while finishing other tasks. When I get back to TCXO compensation, I'll have a tighter target (0.25 PPM from 0-50 C). Wayne On Oct 25, 2009, at 9:49 AM, Dave G4AON wrote: > The menu of the K3 is getting too complex, there are already hidden > items which aren't obvious (like pressing "1" or "4" in some menus). > My > vote is to stick with the basics. > > Can we let Wayne finish off items like synchronous AM and TCXO > temperature calibration, both of which are in the manual and have been > for 2 years. Wayne is too easily sidetracked as it is! > > 73 Dave, G4AON > K3/100 #80 > ----------------- > I use a Yaesu MD100A8X to my K3. The up/down buttons works fine for > frequency > up/down. > My request: Selectable use of the buttons, I would like to have band > up/down. > > 73 de Jan SM5FQQ K3 #2054 > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
