This is pretty cool! The installation and use of the new software went smoothly. I dove into customizing the "Quick Split" macro for my specialty; CW DXing. Using Wayne's macro as a start, I added the SB1 command to (always) turn on the sub receiver and the BW$0080 to widen out the sub Rx to 800 Hz to aid in searching for the (sometimes) elusive QSX frequency of the DX station. I also changed the QSX to +1KHz since many CW DX guys who start out a session in simplex and then split as things get too busy for simplex, usually start at +1KHz.
The MACRO: SWT13;SWT13;FT1;UPB4;RT0;XT0;SB1;BW$0080 Now when the weak DX that is annoying us all by working a simplex pileup finally says "up 1", a single button press gets you there before most of the rest! If the split is otherwise, I then only need spin the B VFO knob. I love it! Mike Now for DSP macros so we can turn on the main Rx in both ears while searching for the QSX in the right only... ;-) Wayne Burdick wrote: > If you'd like to get a better feeling for the kind of commands you can > embed in a K3 switch macro, please see page 4 of the K3 Programmer's > Reference, available here: > > http://www.elecraft.com/manual/K3_Pgmr's_Ref_Rev_C3.pdf > > A number of practical macro examples are shown. Details on how to use > specific commands can be found starting on page 6. > > 73, > Wayne > N6KR > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
