Thanks! that was it - set to PSK31 d on 80 m and AFSK on 40
Appreciate the response 73 John VE3NFK
Greg - AB7R wrote:
>
> Correct but it only works in PSK-D and FSK-D.
>
> 73
> Greg
> AB7R
>
>
> -----Original Message-----
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net]on Behalf Of W6NEK
> Sent: Saturday, October 31, 2009 4:41 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] K3 DATA question
>
>
> Hi John,
> I think your missing info on the K3 "CW-to-Data" mode function.
>
> You can use data modes completely stand-alone (i.e., without a computer).
> Just turn on text decode, and send CW using the internal keyer. The CW
> will
> be transmitted as PSK-31 or RTTY depending on which mode you selected.
> (See page 34 of K3 Owners Manual Rev D4)
>
> 73,
> Frank - W6NEK
>
> ----- Original Message -----
> From: "VE3NFK" <john.turgo...@gmail.com>
> To: <elecraft@mailman.qth.net>
> Sent: Saturday, October 31, 2009 4:27 PM
> Subject: [Elecraft] K3 DATA question
>
>
>>
>> Hello
>>
>> Playing around listening to PSK / Pactor some Hell etc and works fine in
>> both USB and DATA modes...
>>
>> I touched my key by accident when in DATA mode; and I started
>> transmitting
>> what sounds like PSK...
>> I had to press the XMIT button to stop (first time I just powered off the
>> K3)... I am using MultiPSK - but it makes no difference if it is running
>> or
>> not. (Doesn't do it in USB and CW works normally)
>>
>> What am I missing?
>>
>> Thanks and 73 John VE3NFK
>>
>> --
>> View this message in context:
>> http://n2.nabble.com/K3-DATA-question-tp3925543p3925543.html
>> Sent from the Elecraft mailing list archive at Nabble.com.
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
--
View this message in context:
http://n2.nabble.com/K3-DATA-question-tp3925543p3925675.html
Sent from the Elecraft mailing list archive at Nabble.com.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
