There are NO ideals. Every mic and voice are different. Follow the manual as for as ALC readings are concerned. On compression, less is better than more -- although I have to admit, that you can push the K3 compression pretty hard before you start sounding like a South American contester. Still, less is better. But there's an indicator, and manual recommendations for that as well. EQ is just too much related to mic.voice to believe that anyone else's settings are going to match you needs. Use the monitor, get on-air comments.
The other guy's great sounding settings may well leave you sounding like a castrated hamster at the bottom of a 55 gallon drum. I'm not terribly sure what that would sound like, but it's probably not good :-) Grant/NQ5T On Nov 2, 2009, at 2:50 PM, Robert Klein wrote: > I think it would be helpful to know what subscribers feel are the > ideal > settings for TX on the K3. > > I have set compression and mic gain sort of by trial and error, so > maybe we > can start a thread about where folks have determined to be the ideal > settings for COMP and MIC GAIN, and TX equalizer. (I have the KPA100 > installed, and use the Heil ProSet Plus.) I have seen a few blogs > with some > of this information, but there is not a wide variety of mics, for > example, > used. > > Robert > KY1RK > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
