Set mic settings to FPL; it may be set to H. The MH2 is a pretty hot microphone; no need to set gain to high.
73 de James K2QI On Thu, Nov 5, 2009 at 12:58 AM, Bill Davis Jr <[email protected]> wrote: > > I am having the same kind of reports with my K3 #3460 and a MH2 --- I have > to run mike gain control VERY low 6 or less to keep in the good ALC range. > > Bill K0AWU EN37ed > > > > > To: [email protected] > > Date: Wed, 4 Nov 2009 22:22:21 -0700 > > Subject: [Elecraft] k3 Mic Suggestions > > > > I am the new owner of K3 Serial #3605 and love it. I have been using a > > couple of HC5 mics and have been getting criticism on my audio quality > like > > distorted, no energy below 400hz, chopped up sounding. I am running > less > > than 10db compression and staying within recommended ALC limits and no > Bias. > > I have tried various TX EQ settings. I would like to know what mics are > > being used with the K3 and getting good audio quality reports. > > > > Thanks, > > > > Bob W6TR Fort Collins, CO > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
