John, I believe KEYOUT ( and KEYOUT-LP) are direct hardware functions and are not under software control. You will have to add a switch in series with the keyout line to keep from keying the amp if there is no standby available on the amp itself.
73, Don W3FPR John Huffman wrote: > I have two antennas. One uses the K3 internal tuner and one goes > through an amplifier and a manual tuner. > > I have a macro set to select each antenna and set the power level -- > 100w for the antenna using the internal tuner and 45w to the antenna > running the amp. > > I would like to add a command to the macro for the antenna using the > internal tuner. I would like to disable the "key out" amp relay. Don't > want the K3 keying the amp if it is not the antenna getting power. > > Since my amp doesn't have a standby position (Ten Tec Hercules II), I > would also like to bypass the amp relay when tuning the manual tuner. > But, I can't find a command in the Programmer's Reference to disable Key > Out. > > Is there an undocumented command to disable Key Out? > > 73 de K1ESE > John > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
