Dave, On the bottom of the RF Board, check the small RF Choke RFC15 for continuity - check with the ohmmeter, voltage checks at both ends will be 5 volts even if it is open. If it is open, you can use a temporary jumper across it, but get the proper choke and install it when available.
73, Don W3FPR David Lankshear wrote: > This is a long shot, but I had this sort of problem for quite a while and > tried all sorts of things to fix my "watery" CW. > > If your radio is equipped with the KDSP2, check the settings. I must have > been playing with the K2's DSP settings just prior to the arrival of my K3, > so by the time I got round to using my K2 again, I'd forgotten all about the > tinkering. > > I awarded myself the dummy of the week prize HI! > > 73 DaveL G3TJP > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
