I am concerned what might be a problem. I lost all power out when working the
Nov Sweeps SSB last night. The receive was fine. I could hear the audio stop
and ALC reading drop to nothing when I pushed PTT, but there was no power out
when I spoke. This happened very suddenly.
I started the event outside. I hooked a random wire through a UNUN into a
tuner. I could feel a RF burn from the case of the rig but got it tuned down
and operated awhile with seemingly no problems. I brought the rig into the
house and connected to the normal Vertical and was operating when the loss in
power out happened. Turning the rig off revived the power for a minute then
it happened again. I moved down to CW and it seemed OK. I came back to SSB
and operated another 15 min with no trouble. This morning it seems OK so far
as well in the last 30 minutes. I should have thought to push the tune button
to see if I had power out that way.
I would like to get some ideas what went wrong and also if I am
damaging/damaged my rig with the tuned random wire. This rig is a huge
investment for me. I don't intend to abuse it, though I will be using it in the
field as well as in the shack.
Thanks for any help.
Ivin W9ILF Serial# 04892
btw: an auto tuner will be on order very soon. CANT WAIT!!!
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
