I've had excellent results from the little Radio Shack electret mike cartridges too. They are spec'd flat from about 50 Hz to 16KHz, so any audio "shaping" happens external to the mike, usually in the rig. That's the right place to do it.
And they only set you back a couple of dollars - Ron AC7AC -----Original Message----- ..I have another suggestion some might want to try. My biggest concern with most of these headsets is finding one that has really good earphones--they vary a lot. If you find one you really like, and don't think the microphone is good enough, you might try just replacing the cartridge with one from Radio Shack. I've made several electret microphones, all of which got very good reports as to audio, using the Radio Shack cartridge. There was unanimous agreement that they sounded better than the Heil Pro Set I have... Dave W7AQK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
