LP-Bridge only works with K3. It is not a generic serial splitter, but more like a multi-port router with conditioning of the data.
73, Larry N8LP Date: Tue, 24 Nov 2009 14:52:48 -0800 (PST) From: "Julian, G4ILO" <[email protected]> Subject: Re: [Elecraft] [MM] W2 connection problem - NZ0T Comment To: [email protected] Message-ID: <[email protected]> Content-Type: text/plain; charset=us-ascii NZ0T wrote: > > > > Hi Julian, > > > > It works just fine with the real serial port. Works fine with the virtual > > port with the K3 but not with the W2. > > > Have you tried the demo version of this: http://www.serialportsplitter.com/splitter.html ? It might help determine whether the problem is with the emulation of VSPE or something else. Unfortunately the only other free serial port splitter I know of is com0com http://com0com.sourceforge.net/ and I couldn't get that to work at all. There is also LP-Bridge http://www.telepostinc.com/LPB.html but that emulates a K3 in memory and I don't know whether it would work with a W2. ----- Julian, G4ILO. K2 #392 K3 #222. * G4ILO's Shack - http://www.g4ilo.com * KComm - http://www.g4ilo.com/kcomm.html * KTune - http://www.g4ilo.com/ktune.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
