I've just upgraded from firmware 3.27 to 3.63, and the gain balance in the rx has been altered significantly. The rf gain now reduces the S/N quite noticeably as soon as it is rotated counter clockwise from max, suggesting the gain is being mostly backed off at the rx front end, leaving the IF stages on full gain. This can be best heard by tuning in a steady unmodulated carrier on AM, at say S7. Turn rf gain to max, af gain up to hear background noise. Now reduce rf gain - the noise goes up! Then as I reduce the rf gain further, the s meter reaches 9+25, then there's a click and the meter jumps down to S7 and the signal is audible again!
Things I've tried:- - reverting to 3.27 - problem disappears. RF gain at minimum shows 9+25 on s meter. - updating to 3.63 again - problem returns - re-did the rf gain calibration - problem remains I have agc dcy=soft; hld=0.30; pls=nor; slp=012; thr=005 Seems the gain calibration function was changed in 3.41. Can anyone duplicate this? Graham ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
