> It's a fair point you have raised, but I just did a few tests > and it is possible to select and change menu values while a > program is polling during normal operation.
That's true as long as the second program is only polling for data that is available directly (e.g., FA; FB; IF; MD; etc.). If, as in the case of some software, the other program is polling for information that involves reading icons or special display modes (e.g., the alternate display for VFO B), those polls will cause a conflict. > Obviously it would be easier if more options > could be set using direct commands so programs don't have to > put the K3 into menu mode at all to read or write settings. That's the reason I raised the issue ... as long as there is any data that requires "reading the display" multiple access can be a problem. 73, ... Joe, W4TV > -----Original Message----- > From: [email protected] > [mailto:[email protected]] On Behalf Of Julian, G4ILO > Sent: Thursday, December 10, 2009 4:21 PM > To: [email protected] > Subject: Re: [Elecraft] [K3] K3 software utility needed > > > > It's a fair point you have raised, but I just did a few tests > and it is possible to select and change menu values while a > program is polling during normal operation. Clearly there is > the potential for conflict - if you send UP or DN commands > hoping to change frequency it will change the menu selection > instead, just as turning the VFO will when a menu is > selected. But as long as people are aware of this and use the > utilities intelligently and don't try to tune the band at the > same time as they are loading settings I don't think there > will be any problems. Not enough to render such utilities > useless, anyway. Obviously it would be easier if more options > could be set using direct commands so programs don't have to > put the K3 into menu mode at all to read or write settings. > > ----- > Julian, G4ILO. K2 #392 K3 #222. > * G4ILO's Shack - http://www.g4ilo.com > * KComm - http://www.g4ilo.com/kcomm.html > * KTune - http://www.g4ilo.com/ktune.html > > -- > View this message in context: > http://n2.nabble.com/K3-software-utility-needed-tp4145346p4147907.html > Sent from the [K3] mailing list archive at Nabble.com. > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
