Phil, Note that those are optional - not required, but they are useful if one wants to do the precise adjustments - the default settings will give you a fully working K3.
The Elecraft XG2 has a 50 uV output level, look at the Mini Kits. 73, Don W3FPR Phil Hystad wrote: > The K3 Assembly guide says that you would need a accurate power meter > measuring 1 mW to 5 W. Also, a signal generator calibrated 50 microVolts > output at 20 or 40 meters. I have a signal generator that goes up to 5 MHz > but I am pretty certain that the voltage adjust does not go down to 50 > microVolts (it is pretty cheap). > > So, where does one get these things. > > I thought I remember someone telling me that there was a signal generator kit > for generating the test signals needed for K3 assembly but I just can grab > enough of that memory to do anything with it. > > Also, these tools are marked optional. Why are they optional and if they are > useful for a particular purpose why would it not be a required tool to > achieve the best of whatever they are being used for. > > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
