Thanks Brian - the improvement in "AUTO" is very evident in my limited use so far. Really looking forward to the software for computer display!
Brian Broggie wrote: > > Hot news! The latest W2 firmware rev (0.92) is now available on our ftp > site. The easiest way to get it downloaded into your W2 is with our > "Elecraft W2 Utility" program, available in three flavors (PC, Mac, > Linux). Check out the Elecraft website for all the details! > > This new W2 firmware version has the following cool features... > > First, a fix: > > *SWR LED's FLASH RANDOMLY WHEN A SENSOR IS CONNECTED:* This turned out > to be caused by corrupted data in EEPROM. This version checks for this > and will correct it by restoring the data to default settings. > > And then some enhancements: > > SENSOR CALIBRATION VALUES EXPANDED: The calibration data for the Sensors > is now saved both by Sensor type and the connector used by the Sensor. > Among other benefits, this allows you to calibrate two of the same type > of Sensors independently. > > FURTHER IMPROVEMENTS IN "AUTO" RANGE DISPLAY: We are continuing to > improve the LED display in the "Auto" mode. In addition to editing > algorithms, we are setting the LED and Serial Data Output modes to > default as PEP, rather than Average Power. This can be changed at any > time using the "M" (LED's) and "N" (Serial Data) commands > > We hope this latest version makes the W2 an even more useful and > enjoyable wattmeter for your shack. Keep watching for the next release > and new W2 related software programs coming soon! > > 73, > Brian, W6FVI > W2 Firmware Engineer > Elecraft, Inc. > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > -- View this message in context: http://n2.nabble.com/New-W2-Firmware-Rev-0-92-available-on-our-ftp-site-tp4173495p4176642.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
