In working with Lyle on earlier versions of the rf calibration I saw some of
this same action. In some cases, the s-meter wouldn't even reach FS at min RFG.
You might try backing off to factory defaults and starting over, making sure
you have the latest utility.
On 09-12-23 0:59 , Wes Stewart wrote:
Wes
RF Gain calibration completed as per manual no problems seen in the
calibration procedure.
If in Config menu >>Smeter OF or other Smeters menus and I move
the RF Gain the Smeter will respond as you would expect.(this is just a
curious sidebar that is probably not useful info)
In normal operation AGC OFF or ON S or F , PRE ON or OFF, ATT IN or
OUT, ALL MODES ALL FITERS I get a gain increase in the main rcvr at
the 9:30 position of the the main rf gain.
Since the RF Gain calibration works for the sub reciever and the RF
gain and S meter on the Sub rcvr work correctly I am beginning to
suspect the JFET IF Amp and associated circuits of the main rcvr.
Jim
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
