I've reset everything for Data A.....ALC 4-5 bars and the power still creeps from about 80 to 100w in about 5 seconds. After that, as long as their is no further mode change the power is always 100w without any creep. Elliott WA6TLA
----- Original Message ----- From: "lyle johnson" <[email protected]> To: "Bruce Beford" <[email protected]>; <[email protected]> Sent: Thursday, December 24, 2009 12:41 PM Subject: Re: [Elecraft] K3 Data mode power creep >> ... with DATA A mode you should be setting the input audio level to >> get 4-5 bars of ALC, then setting the Power out on the rig for the power >> level desired. If you do not have this level of ALC action, then the >> radio >> tries to increase the gain to bring the level up... > > Exactly! > > 73, > > Lyle KK7P (in Tucson) > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
