Robin, It is possible for the K2 to have lower transmit RF gain on 160 meters, but then since you can obtain full output by whistling into the microphone the K2 RF cahin has adequate gain on 160 meters. The highest gain through the K2 transmit stages is normally at 40 or 30 meters although some show the highest gain somewhere between 80 meters and 40 meters. In any case, if you get any bars at all on the ALC indication that is sufficient for full output. You might want to try increasing the compression a little - I normally run the compression on my K2 at 3:1 - that will bring up ;;the average power for you.
73, Don W3FPR Robin Kiszka wrote: > Hi Don, > > I doubt there is any problem on the watt meter as it's working fine on other > radios for 160m. > Another reason I suspect it is a K2 issue is because the K2 bar graph LED > hardly lights on 160m SSB Tx, whereas on 80m and up I can easily get 4 or 5 > bars with normal LSB speech on Tx. It's like the radio is deaf to the > microphone on 160m. > > 73 > Robin > OZ6ABM / 5P5R > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
