Eric, The connector on the XV transverter series is DE-9 not DB-15. The DB-15s will fit the K3 ACC connector. Yes, the connectors are normally a daisy-chained Y cable for all except the end devices. but I suppose they could be all single cables going to a "spider" hub created from Y cables, although it should be tested - that arrangement may be more prone to noise pickup.
73, Don W3FPR eric norris wrote: > Is there any reason why I can't use a simple Y-cable to extend the cabling > from one XV transverter to two? I bought a handful of DB-15 Y-cables from > Cable Wholesale (based on a recommendation from this list) and so far they > have worked FB I use one DB-15 to split off PR6 control, another for the > XV-144, and one for a top-ten band decoder. Any reason why I can't add > another when I finish my XV-432 and stack it on top of my XV-144? > > 73, > > Eric WD6DBM > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.722 / Virus Database: 270.14.123/2592 - Release Date: 12/29/09 > 02:47:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
