Eric, Please clarify, There are no LEDs on the KAT2, but the external KAT100 does have LEDs. (The mind does get 'fuzzy' at 4 AM).
In any case, if you are talking about the KAT2, CAL S should show the SWR. If it does not indicate SWR correctly, and the SWR changes with the power level, that is an indication that the bridge is not balanced - re-do the CAL n procedure to correct. Pout shows forward power and reflected power. In this setting, if the SWR is other than a perfect 1.0 match, there will be some reflected powr and it will vary with the power level. 73, Don W3FPR eric norris wrote: > Gangue: > > I am trying to set my K2 to bypass the internal KAT2 tuner and display SWR. > When I set ATU CALS it shows the power out instead of SWR. When I set ATU > CALP I also get power out. I am running the K2 into a dummy load through a > wattmeter, wattmeter confirms SWR 1-1. Even in ATU CALS the LEDs on the > front panel vary up and down by the power out not the SWR. WHAT AM I DOING > WRONG? WHY AM I STILL PLAYING WITH MY K2 AT 4AM? > > thanks and 73 > > Eric WD6DBM > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
