Thanks Lyle! James K2QI
-----Original Message----- From: Lyle Johnson [mailto:[email protected]] Sent: Saturday, January 09, 2010 10:42 AM To: James Sarte Cc: [email protected] Subject: Re: [Elecraft] K3 New DSP Replacing > How can we ensure the LPF is there once we receive our rev D boards? Look for either: (a) a small piggyback board on the back of the DSP board near the speaker amplifier IC (U1, at the upper left corner of the PCB as you face it in normal orientation with the component side of the board facing you, or (b) an IC (U30) and a number of components surrounding it to the right of the speaker amplifier IC (U1). Note that Rev D refers to the "assembly level" of the DSP board, *not* the raw PCB revision level. If you are still uncertain, after you receive your new DSP board assembly, send me a private email with photos of both sides of the DSP board and I'll let you know if it is equipped with the LPF or not. 73, Lyle KK7P ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
