I just finished an inventory of my K2 and I have a couple of quick questions.
1) For several of my SIP resistor packs, my part has an extra "C" in the number. For example the manual will give the number as "770103471" and my part is "103C471." Am I correct in assuming that these are the same? 2) I am more puzzled by a couple of capacitors that I have in the kit and a couple listed in the RF board parts list. I'm not sure that they match up: - The parts list gives C33, 2.2 pf, NPO, "2R2" or "2". I have a small orange disk with a black tip that says "2.2". Are these a match? - The parts list gives C22, ??? pF, NPO, "2R7", "3", "3.3", or "3R3". (The value in the manual is not printed correctly, but I think it's supposed to be 3.3 pF.) I have a small blue cap that says "2.7C" on one side and "1 A" on the other. Are these a match? BTW, "C22" is also used to designate a variable capacitor, but I think that this "C22" is a fixed value in the 20/30 meter band-pass filter. Thanks in advance for any help that you can give! 73, Paul - N8XMS ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
