Disable the AGC and see if the volume goes up quite a bit, if it does then the AGC voltage set point is not set proper, go thru that part of the alignment again.
Gregg, W9DHI 2rGarry wrote: > The speaker audio seems a trifle low on my K2. With headphones it's good but > I have to crank the volume control quite high to get decent audio output > from the speaker. I suspect that the audio is just as designed. Is that > typically the case with the K2? Or should I be looking for a problem? As I > said, with the headphones there is no issue whatsoever, I can feed audio to > the headset and to the computer input (for psk) with no problem by just > using the headphone jack and a splitter. > > I'm wondering if I need to build an amplified speaker for monitoring without > having to wear the headphones. > > Thanks. > > Garry -- K2 6849 > -- Gregg Lengling W9DHI http://forums-ham.radio.ch Administrator ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html