Here are the settings I use - worked out with a group on 1.947 that is very "up" on all that SSB stuff.
1 +4 2 +1 3 +1 4 +2 5 +2 6 0 7 0 8 0 Seems to need some help in the lower frequencies. I also use a RatShack studio mic and it seems to need less highs also but not any bass boost. I suggest you find a quiet frequency, a group of friends and work it out over the air. 73 Bill NZ0T Don Wilhelm-4 wrote: > > Phil, > > Adjust the mic gain until you have 5 to 7 bars indicated on the ALC > meter, then add compression as you desire. > You can use the monitor to listen on the headphones (just remember to > turn the monitor back down to zero to use the speaker(s) or you will > have a lot of audio feedback). > > 73, > Don W3FPR > > Phil Hystad wrote: >> I just received the MH2 hand mic in the mail today for my rather new K3. >> Can someone suggest some starting "settings" for mic gain and >> compression. Right now, I have mic gain set to 5 and compression set to >> 4 but I really do not know how it comes across over the air. I could >> monitor the signal but I would rather start off close to a good mix and >> then diddle with it from there once I find someone close to monitor my >> audio signal. >> >> Thanks, >> 73, phil, K7PEH >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > -- View this message in context: http://n2.nabble.com/K3-MH2-Mic-tp4372634p4385698.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
