The low-gain setting will "work" with the Heil mic elements, but you will have to run your mic gain control up to about max, unless you typically scream into the microphone. As Tom says, either will work, but the HI setting works better.
In addition, if you intend to use VOX, the LO setting will not provide sufficient audio to operate the VOX effectively, in my experience. YMMV. Bill W5WVO -------------------------------------------------- From: "Tom Williams" <n...@roadrunner.com> Sent: Thursday, January 14, 2010 4:42 AM To: <elecraft@mailman.qth.net> Subject: Re: [Elecraft] K3: Heil HC-4 > Ruben, > > I gave you the setting I use (mic gain Low) with my HC-4 element. You can > use either gain setting and it will work. > > 73, > Tom N2CU <>< > K3 #3582 > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
