I am on pages 44 and 45 of the assembly manual and have made it through all the steps. In going through the resistance checks, I got the following values:
- At the power poles (12VDC), all I got was an infinite resistance no matter which way I made the measured it. - At the R36 test point, I got 239.5 ohms which beats the 150 ohm criteria listed - At the U12 test point, I got 2 different values: a) 4.86 kilo-ohms at the terminal furthest from the blue electrolytic capacitor in the neighborhood of the U12 regulator b) 237.2 ohms at the terminal closest to the blue electrolytic capacitor in the neighborhood of the U12 regulator - At the U13 test point, I got the following: 423 ohms. Question: Am I okay to go ahead and apply power for the initial power on check (aka "smoke test") on page 46? Please advise 73 Steve KC2VNI -- View this message in context: http://n2.nabble.com/K3-Build-Questions-tp4410947p4410947.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
