I don't think you can. Doing it manually on the radio is a toggle, it switches state AFAICS. The macro is just emulating that.
Mike NF4L Barry N1EU wrote: > Yes, but you can't embed a conditional statement in a macro so being > able to read the current ESSB state doesn't help. So under the > constraints of macro coding, how to turn ESSB on/off independent of > current state of ESSB? > > Tnx/73, > Barry N1EU > > On Mon, Jan 18, 2010 at 12:15 AM, Greg <[email protected]> wrote: > >> Ooops....no bug. Radio was in CW mode. Duh! >> >> The first line show ESSB off, second line shows ESSB on. >> >> IC\x80\xA8\x94\x90\x80; >> >> IC\x80\xA8\x94\xB0\x80; >> >> So the status of Byte D tells you the status of ESSB. >> >> 73 >> Greg >> >> >> >> On 1/17/2010 4:05 PM, Greg wrote: >> >> When looking at this Barry I thought maybe you could read the status of the >> "+" icon on the LCD. That is supposed to be on if ESSB is on. I think a >> bug got into the FW where the icon is no longer showing when in ESSB. >> >> This is from the current Programmer's manual... >> >> IC * (Misc. Icons and Status; GET only) >> RSP format: ICabcde; where abcde are ASCII characters (Byte in Table 4 >> below) used as collections flags (Bit >> in table). Each flag represents the status of an LCD icon and/or specific >> transceiver function. >> Some functions whose status is indicated by IC command flags can be >> controlled using emulation commands. For >> example, the K3 can be put into TX TEST by sending SWH18. The condition can >> be verified at any time using the >> IC command (byte a, bit 5). Another example: ESSB (extended SSB) can be >> turned on/off using an MN (menu) >> command, followed by SWT11, simulating a tap of 1 on the keypad. Again, IC >> can be used to verify the present >> state (byte d, bit 5). >> >> >> 73 >> Greg >> AB7R >> >> >> >> >> >> On 1/17/2010 12:35 PM, Barry N1EU wrote: >> >> Can someone please confirm: it is possible to toggle the TX ESSB on/off >> value via macro (mn096;swt11;mn255;) but it is impossible to set it to a >> known value of "on" or "off" ? >> >> Thanks/73, >> Barry N1EU >> >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com >> Version: 8.5.432 / Virus Database: 270.14.147/2628 - Release Date: 01/17/10 >> 07:35:00 >> >> >> >> No virus found in this incoming message. >> Checked by AVG - www.avg.com >> Version: 8.5.432 / Virus Database: 270.14.147/2628 - Release Date: 01/17/10 >> 07:35:00 >> >> >> > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
