Should I be able to use the Elecraft N-Gen or XG2 signal generator to do my pre-alignment steps on page 79.
I have no RF generator with me here as I winter in Sebring, FL, trying to build and finish my K2. I can get the 10meg output from my Heath frequency counter to come thru and adjust L8 and L9 for max signal strength. Also while tuning across the dial I get at one point, voices in Spanish so I have to assume the radio is somewhat working. This is with a two foot shielded rf cable connected between the antenna input and the freq counter. If the N-Gen or XG2 set a 50 micro volts is enough to do the peaking of the coils, what have I missed when trying to hear their input via headphones? The manual says that I should be able to use the N-Gen. Alan Latz KA9UCP ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
