The conclusion, only found at the very bottom of the article: "Conclusion:
RF clipping, as implemented in the K3, is quite effective at increasing "talk power" without causing major increases in transmitted intermodulation. The resulting audio quality at high levels of clipping may not be suitable for extended rag chew conversations, but will provide useful improvements in contests or other situations where maximum dynamic range of the recovered audio is not the primary consideration." Although 31 ms of delay was reported, that wasn't what the article was written about. 73, Guy. On Thu, Jan 21, 2010 at 6:38 PM, Bob Cunnings <[email protected]> wrote: > Here's an interesting piece on K3 transmit audio processing: > > http://www.cliftonlaboratories.com/elecraft_k3_speech_processing.htm > > where it is reported that "There's 31 milliseconds of processing delay > in the K3's DSP stages between microphone input and monitor output..." > using the setup described in the article. The date is 15 March 2009. > > Bob NW8L ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
