Correct. You can turn blanking on with the front panel switch and go to the setup function and dial it in and out with the knob and listen for the relay click.
--- On Sun, 1/31/10, Joe Planisky <[email protected]> wrote: From: Joe Planisky <[email protected]> Subject: Re: [Elecraft] [K3] Noise blanker insertion loss To: "Lyle Johnson" <[email protected]> Cc: "Wes Stewart" <[email protected]>, [email protected], "IIIEdward Dickinson" <[email protected]> Date: Sunday, January 31, 2010, 6:32 PM Nearly the same here (-2.2dB), but only when the IF NB is used. No loss at all with just the DSP NB engaged. 73 -- Joe KB8AP On Jan 31, 2010, at 4:31 PM, Lyle Johnson wrote: > >> I just noted that my noise blanker has an S-unit of insertion loss. > > I measure 2.0 dB (AGC OFF, using AFV/dBV internal functions and > monitoring a steady nominal S5 carrier on 6 meters). > > 73, > > Lyle KK7P > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
