Dave you are not an ignorant because now that you mentioned it,my K3 behaves the same way, it look like DSP NR works in conjunction with the AGC so when you disengage it then NR will not work at all and the "N/A" (not aplicable) sign shows at the display,anyway I never use the radio without the AGC,for me it works better that way,but maybe this is another issue that Elecraft should fix. AD4C
"For a refined ham it is compulsory to own a k3" --- On Sun, 2/7/10, David Y. <[email protected]> wrote: From: David Y. <[email protected]> Subject: [Elecraft] AGC and DNR To: [email protected] Date: Sunday, February 7, 2010, 2:46 PM Hi All, This has probably been discussed, and I obviously missed it. It's probably in the manual somewhere too. Since I have not previously been one to turn my AGC off, I just wasn't aware of it. Now I find that if I turn my AGC off, my DNR will not engage--I get a big "N/A". So, this is normal? You must have the AGC on to use DNR? I apologize in advance for my ignorance on this matter. Dave W7AQK ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
