Werner, That higher level is not available from the KXV3, but 0 dBm (1 mW) is available. I am wondering why you do not plug the XV432 for the -20 to 0 dBm range and operate with the KXV3. You must have reasons other than the K3 for making your choice of input power. The only reason I can think of is that you are also using another (non-Elecraft) transceiver as an IF in addition to the K3. If you are using isolated input/output lines on another other IF transceiver, put a 24 dB attenuator in the transmit IF input to drop the 250 mW level down to 0 dBm.
73, Don W3FPR Werner Hasemann wrote: > Hello, > I would like to run my XV432 transverter with 100 to 250 mW from the K3 with > the transverter-option. Did not find a solution in the handbook. Any good > ideas ? > Thanks Werner DJ9KH > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
