Have you looked at the "The Nifty Mini-Manual"? It has 3 pages on the DSP settings. I find it really easy to follow. The people who sell these are wonderful people.
In the following "Hold" means hold the button(s) for a count of 3 seconds My most common Non-configuration adjustments during normal rig usage: - Transitioning through the filters = Hold XFIL - Turn Noise Reduction ON/OFF = HOLD XFIL + MSG together Filter and Noise Configuration adjustments: >From the main frequency readout - Quick_tap DISPLAY - Hold BAND+ to cycle through settings When you are cycling through these settings and you get to the [dSP On] display - Quick-tap BAND- will turn DSP OFF When DSP is OFF it will look like [dSP bYP] With [dSP bYP] is displayed HOLD BAND+ to turn DSP ON. NOTE: The display will not change after you release the hold button but the DSP is back on. To verify quick-tap BAND+ The filter settings are fairly straight forward. Its the noise reduction adjustments that one might find the most confusing. I use a 750Hz side-tone so my filter settings: The period after the C indicates D-noiser is ON C.1 = .75 .80 C.2 = .75 .40 C.3 = .75 .20 C.4 = .75 .05 With the Configuration display as [C1 nr], [C2 nr], [C3 nr] or [C4 nr] - Quick_tap BAND+ to cycle through Noise Reduction Levels - Quick_tap BAND- to cycle between "Standard" cw filter and "Soft" cw filtering I prefer "Standard" cw filtering instead of the "Soft" cw filtering I have my Noise Reduction settings at [nr .99 .10] When your playing with the noise reduction settings you will get your most pronounced change when transitioning from 99 to 00 on either the Aggressive value or the Hold-time value. N1BBR -- [email protected] ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
