Rich, Try a quick test - plug the paddles into the KEY jack and close the dot contacts on the paddles. If the K3 transmits, then the KEY jack is operating properly - look at your WinKeyer for the solution to your problem (it is not providing a sufficiently low resistance for keying).
73, Don W3FPR Richard Hill wrote: > I've replaced my 746 with a K3. Using a microKeyer II between the radio and > computer, and it played well with the 746. When I test the winKeyer from the > mHam router, I see CW and PTT1 light on the mK II and see TX light on the K3, > but --no-- power out. If I key the rig via paddles, I see TX light on the K3 > and see power out on the SWR meter. > > I'm guessing I have missed a K3 config setting, but have not found it over > the weekend. Can someone point me in the right direction? Thanks. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
