Jim, Yes, there is a page in the manual where it tells you that you can install parts like the headers and standoffs for the options. The only one that you should not pre-install is the K60XV, and the manual also tells you that. Leave the jumpers for the options in place until you have the basic K2 up and running, then follow the installation instructions for each option.
If you were building your 10th K2, I might advise you differently, but for the first 10 - follow the manual instructions, things are less complicated that way. 73, Don W3FPR Jim Dunstan wrote: > Hi, > > If I order a package including K2, KPA100, KSB2, KNB2, and K160RX and > start to do the assembly I wonder if in the assembly process I will come to > certain stages where there will be a question whether a certain module is > going to be installed. If yes, do this and if not do that. I understand > that if certain modules are installed after basic assembly some back > tracking is required. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
