I'm having a bit of trouble with the KIO2 in my K2 and when I was poking around to see what was what, one of the brass nuts came off of J1 (J1 is the nine pin jack that sticks out the back of the K2). The two brass nuts were originally soldered onto J1 before J1 was attached to the KIO2 PC board. But now that it's attached I can't get the nut back on.
Does anyone have any suggestions as to how to get that nut back on to J1, I can't seem to hold it in place to re-solder. I'm tempted to try a drop of crazy glue? The KIO2 still doesn't seem to be communicating. I re-soldered all of the J1 connections to the PC board, which was suggested in the troubleshooting section of the manual, but it's still not talking to my computer (that's how the problem with the nut started). Thanks in advance for any suggestions you may offer. 73 de, Tom WB2QDG K2 #1103 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
