Hi, "Via" means "by way of" as in "via airmail". In this case we route from one side of the board to the other (or from one layer to another) via a feedthrough as they used to be called. In this day of shortforms and acronyms they are universally simply called via's.
AB2TC - Knut Radio Amateur N5GE wrote: > > <snip> > Howdy Dave, > > Via's are holes in the circuit board that are plated through the board > to the other side. Don't ask me why they are call via's ;o) > > The purpose of the mod is to increase the signal output at the IF Out > connector that you would connect a Panadapter to. Some Panadapter > need a little stronger signal from the K3 to enable you to see weak > signals in the Panadapter display. > > If you're not using a Panadapter you don't need to do the > modification. > > If that doesn't clear it up for you send me email off the list and > I'll try to help you. > > 73, > > Tom, N5GE > > <snip again> > -- View this message in context: http://n2.nabble.com/IF-output-buffer-gain-Mod-tp4659103p4661122.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
