I found a problem with audio output from computer and am transmitting on 15m...But no QSO, so not sure if it will work. Thanks
dale --- On Thu, 3/4/10, DALE LONG <[email protected]> wrote: From: DALE LONG <[email protected]> Subject: [Elecraft] RTTY questions To: [email protected] Date: Thursday, March 4, 2010, 8:05 AM I am having trouble getting started in RTTY. Am using AFSK and N1MM with MTTY. In the RTTY Engine it appears that I am transmitting, but there is no output. Last night I went through all the K3 config parameters, and still no luck. There were a few times that I noticed an "Overload" error message...Another thing is that in the TX tab of the setup, it will not recognize my COM port. Thats probably because it is in use. The problem may be a N1MM setup issue. In the Configur Ports tab, what ports do I need to assign in addition to the radio? Thanks Dale CX/N3BNA ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
