Comments interspersed. Dave Hachadorian, K6LL Yuma, AZ
-------------------------------------------------- From: "Brett Howard" <[email protected]> Sent: Thursday, March 04, 2010 1:11 AM To: <[email protected]> Subject: [Elecraft] RTTY via FSK-D > So I'm thinking about wiring up the FSK IN pin on the AUX > connector to > do RTTY TX "properly". I'm curious of a few things before I > take the > time to make the cable. > > First off how do people usually drive this signal? I assume > its usually > taken off of a serial port... Yes, circuit is shown here: http://www.aa5au.com/rttyinterface.html I've tried a few RTTY apps and I've > gotten them all to work via AFSK and all seem to have their > pros/cons. > I have a feeling in the end that I'll probably most use MMTTY > being that > it has a very nice interface into N1MM (unless there is another > application that has a nice interface into N1MM that I should > be aware > of). MMTTY is the way to go. > > Finally my last question is that if this comes off of a UART > how has the > timing been for people? The timing is solid. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
