Hi Guys, I was transmitting AFSK-A tonight with the K-3 operating at 30 watts output and driving my amplifier and all was working well. I then adjusted the K-3's power output control while transmitting and the K-3 power did adjust. This was the first time I ever adjusted the K-3 output power while transmitting. Is that a problem? Now regardless what I do, the K-3's output power is only 40% of what the K-3's digital readout indicates. Such as: when the K-3 digital readout says the power is set to 100 watts the K-3's RF output indicator and my external wattmeter both show 40 watts output. And when the K-3 digital readout indicates power is set for 50 watts the K-3's RF wattmeter and my external watmeter both indicate only 20 watts. By the way, when I go to CW mode all is well and the K-3 will put out it's usual 100 watts. Firmware Version is 3.68 Right now the maximum power output from my K-3 in AFSK-A Mode is 40 watts. Any idea how I can correct this problem? Thanks- Dick- K9OM ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected]
This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
