Geo, You must have missed the note about C44 on page 22 of the manual - this capacitor is not used.
As far as your extra capacitor, did you do a full inventory before you started including checking the number of capacitors of each value against the parts list? If you did that, you would have known for certain whether there was an extra (that sometimes happens - rare, but it happens). If you did not do a full inventory, I suggest you go to the parts list and check each location that has a .01 uF capacitor on the board. If all those locations have a .01 uF capacitor installed, then you can rest assured that you have an extra one. I know of no easier method. 73, Don W3FPR [email protected] wrote: > Ref control board caps. I have one cap left over 103. I see on board a > place marked C44. But instructions say nothing about this part? What's the > story? Geo/W2BPI > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
