On Wed, 17 Mar 2010 12:53:00 -0000, "David Lankshear" <[email protected]> wrote:
I presume you considered that if there was ever a reason to remove the washer in the future, you may have to damage the front panel to remove it, and decided that was not an important issue. >It was a bit loose on my K3 #1122, but I've seen it as a close fit on other >K3's and a slack fit on a couple of others. > >Mine rattled when the internal speaker was used so I put a little bit of stuff >called Blu-Tak on mine to stop it rattling. Subsequently, on removing the DSP >from the front panel to make changes, I used a tiny dot of superglue to fix it >to the front panel. After finger tightening the nut on the jack socket >there's still a tiny gap but it doesn't rattle any more. > >73 DaveL G3TJP Tom, N5GE K3 #806 with SUB RX, PR6, KRC2 and K144XV K3 #1055 with PR6 and XV432 W1, 2 W2's and other small kits http://www.n5ge.com http://www.swotrc.net ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
