Installed, set in menu XV1 RF 144 XV1 IF 28 XV1 PWR L 1.50 XV1 OFS 5.40 XV1 ADR trn 1
LED flashes once when powered on Firmware sent (again) LED flashes appropriately. NO audio except FM hiss if 'MODE is changed from FM to CW or DATA or AM - band switches to 46.940 (from 146.940) if above is done from 144.390 then with CW, DATA, or CW it switches to 44.390 I thought it was supposed to XVT with 28MHZ per XV1 IF 28 ?? nothing heard with a sig gen either. and of course no power out. Any suggestions please thanks John VE3NFK (the rest of the updates went fine except Synchro AM now has a NEW annoying habit of 'clunking' as it crosses over 739.994 - 740.004 (medium wave am station) which it didn't do before) -- View this message in context: http://n2.nabble.com/K144XV-Doesn-t-work-tp4772885p4772885.html Sent from the [K3] mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html