I have been trying different things with my K3 #2914 - The problem appears
when rig is cold - this evening it was 10 deg C in my shop. I don't really see
it in CW
or with a carrier, but ssb will vary and temp will spike as hi as 100 deg C
for very short periods of time namely milliseconds. Sometime the spike will
sound
like distortion in my audio and power will dropp back to 5 to 10 watts - which
I then reset!
It will spike then drop back to a more normal level. Now I have done transmit
power calibration on 5 and 50 watts. Also I have recalibrated the front panel
and PA temp. I still have the problem. Now I have noticed that it goes away if
I go key down for a minute or so and bring the PA temperature up to say 40 or
even as high as 50 degrees C. Then I have no problems!! It appears to be a cold
start up issue - once the PA reaches a certain temperature ( unknown at this
point) the issue stops! Thanks for your help with this issue!
73 de Bill N4ZI
K3 # 1059 & #2914
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
