George, Use the PN2222A transistors to replace Q11 and Q13 - do that even if you think the ones on the board are OK, those transistors control the bias to the base of the PA transistors, and if faulty can zap your new PA transistors.
The resistor is a replacement for R50 - older K2s used a 1/4 watt resistor at R50, and those should be replaced with the 1/2 watt resistor. Check to see if your R50 is open - measure the resistance from the emitter of Q6 to ground. If you measure more than 1.5 ohms, replace R50 with the one provided, but if the existing R50 is good, you have a spare 1/2 watt 1.5 ohm resistor for your parts bin. 73, Don W3FPR [email protected] wrote: > Received the K2PAKIT today. Besides the two output transistors there are > (2) PN2222A transistors and another part that looks like a resistor with a > color code: brown, green, gold, gold. What am I to do with these xtra parts? > Geo/W2BPI > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ------------------------------------------------------------------------ > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.791 / Virus Database: 271.1.1/2777 - Release Date: 03/29/10 > 02:32:00 > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
