LS, Review all the menu options listed in the manual, and you should then have a better understanding of the variety of ways the K3 can be set up for your particular preferences.
In the case of your specific question, look at the CONFIG: NB SAVE menu description. 73, Don W3FPR lstavenhagen wrote: > Hi all, > > Just refreshing my 6th grade education here: 1 ppm variation at 10 mhz would > be +/- 10 hz correct? I calibrated my K3 ref. osc. again yesterday (against > 10mhz WWV) after a warmup of about an hour - this am I turned it on and > checked it against 10mhz WWV and the display read about 6 or maybe 7 hz high > (against my spot tone in CW mode). > > I'm shocked, I tell you shocked... that this thing is off by 6hz when you > first turn it on, what kind of operation is elecraft to let something like > this through...... that'd be approx .6ppm drift right? > > As for the noise blanker question, sorry if this is in the docs, but the NB > on/off state doesn't save when you change bands (tho the settings of it are > changed). It always turns off when changing bands. Is this configurable? > (i.e. save on/off state of NM per band)? > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
