Hi Jim,
I use K3 internal 2 tones test function + SDR-IQ+ SpectraVue3. If need
I can use HP RF spectrum monitor to test it.
http://photo.blog.sina.com.cn/u/1411826944 for test photos.
73 de ba4rf,David
2010/4/4 Jan Erik Holm <sm2...@telia.com>
> I have measured myself however didn´t come up
> with as poor and/or as good numbers.
>
> What could be interesting is with what and how
> did you measure.
>
> / Jim SM2EKM
> -----------------
> chen dave wrote:
> > Hello All,
> >
> > I checked my K3's TX IMD today(K3 SN:1302), from 5W to 110W. Very
> good
> > TX IMD when I set the output power to 35w( 50db), but very poor when I
> set
> > it to 100w or 110w(20~18db).
> >
> > Any one can help?
> > I have about 10 photos for this test, if interest I can send via email
> > offline.
> >
> > BTW: I use 32A DAIWA PS.
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
--
--------------------------------
All the best!
David,ba4rf
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
