LS, If the L/C settings do not change, then the antenna load is changing. Check for wind moving the antenna, loose coax connectors (especially if UHF type which depend on being tight to provide a continuous path for the shield), bad coax, a balun with water in it, broken wires that sometimes make contact, and any other thing of that nature that you may be able to think of.
73, Don W3FPR lstavenhagen wrote: > Well lemme do some more troubleshooting first. I got scientific on my lunch > break and started recording a few L/C settings. Sure enough, whilst I was > fiddling around, I got distinct changes in my SWR but the L/C settings were > remaining the same at the several frequencies. > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
